GOTM -- the main program

INTERFACE:

   program main

DESCRIPTION:

This is the main program of GOTM. However, because GOTM has been programmed in a modular way, this routine is very short and merely calls internal routines of other modules. Its main purpose is to update the time and to call the internal routines init_gotm(), time_loop(), and clean_up(), which are defined in the module gotm as discussed in section 2.3.

USES:

   use time
   use gotm
   IMPLICIT NONE

REVISION HISTORY:

   Original author(s): Karsten Bolding & Hans Burchard
   $Log: main.F90,v $
   Revision 1.7  2005-11-15 11:45:08  lars
   documentation finish for print
   Revision 1.6  2005/06/27 13:44:07  kbk
   modified + removed traling blanks
   Revision 1.5  2003/03/28 09:20:34  kbk
   added new copyright to files
   Revision 1.4  2003/03/10 09:20:28  gotm
   Added new Generic Turbulence Model + 
   improved documentation and cleaned up code
   Revision 1.3  2001/11/18 13:07:06  gotm
   Cleaned
   Revision 1.3  2001/09/19 08:26:08  gotm
   Only calls CPU_time() if -DFORTRAN95
   Revision 1.2  2001/05/31 12:00:52  gotm
   Correction in the calculation of the shear squared calculation
   - now according to Burchard 1995 (Ph.D. thesis).
   Also some cosmetics and cleaning of Makefiles.
   Revision 1.1.1.1  2001/02/12 15:55:59  gotm
   initial import into CVS